Finally, an economical spa sanitizer that is Single Dose and One Step - easier to use than chlorine and more healthy than chlorine.

Here is what Pool Magic for spas will do for you:

CHLORINE FREE, METAL FREE and BIGUANIDE FREE

Yet, is compatible with chlorine, metals and biguanides.

Finally, a one step pool sanitizer that only requires a monthly dose, one bottle should last approx 6 months!

pool magic for spas remains effective to as low as 20% of its full strength dosage, but a top up dose is recommended every month for best results

So harmless, it’s like swimming in drinking water **

** when Pool Magic for spas is used in accordance with the instructions, the water quality has been tested to meet World Health Organization standards for drinking water. However, this product is NOT intended nor approved for drinking water sanitation.

Active ingredient present as polymeric quaternary ammonium chloride 20%, enhanced with our secret Activator B.  Formula

It really is pool magic - for spas

Pool Magic for spas is an exciting advancement in the sanitation of spa pool water. It is a long term disinfectant effective at killing bacteria, viruses and algae.
Pool Magic for spas has no smell, is not volatile and is not affected by sunlight. And it is harmless to humans.**

This chlorine-free, metal-free and biguanide-free spa sanitizer lasts up to 3 months in a single dose and is effective when dosage falls as low as 20% of its full strength. However, it is recommended that the level is checked every month using the Pool Magic test kit and a top up dosage applied.

This amazing product is also compatible with chlorine, metals like copper, zinc and silver and even biguanide chemicals.
It is truly a one step—one dose sanitizing system. 
There is no need to shock the spa under normal use. But, should a shock be necessary, simply add a chlorine shock dose to the spa.

Instructions for use

Balance the pool water, as usual :- maintain pH at 7.0-7.2 (pH above 7.2 shortens life span of Pool Magic and should be avoided) - maintain alkalinity at 80-120ppm ***- maintain hardness at 200-250ppm ***

 ***Add Pool Magic for Spas as follows: Add 100mls per 1,000L of pool water, directly into spa pool and top up with 75ml each month. Please keep the pH at 7.2 or below to prevent the active ingredient being consumed too quickly!  Change spa water every 3 months for everyday sanitation purposes.

HELPFUL HINTS

Aside from maintaining correct water balance, Pool Magic for spas is the only sanitizer required for your spa pool       

SINGLE DOSE. SINGLE STEP. EASY!

There is no need to shock the spa routinely. However, in the unlikely event that the pool is losing water clarity ,or losing water quality, a shock dose of chlorine is the most economical remedy. Pool Magic for spas is compatible with chlorine.

EUROPEAN UNION APPROVAL

Pool Magic for spas is approved by the European Union as a biocide suitable for swimming pool use.
Pool Magic for spas has a shelf life of up to 2 years. Store in a cool place away from direct sunlight.

WHO SHOULD USE IT ?

Well anyone with a spa pool really.... Why use chlorine, bromine, biguanides, or metal based systems when Pool Magic for spas is Single dose, single step, and requires no more than a monthly application... and it is so economical!

For those wanting a totally natural spa solution... try our Spa Magic chemical-free formula, based on natural enzymes.