Table shown fully extended at 3.2M, with second extension ticked away nicely inside the frame
The OCALA dining table extends from 2.2 metres to 3.2 metres
Picture shows the 2 separate extension leavesfoer the OCALA extending dining table
The OCALA dining table extends from 2.2 metres to 3.2 metres
Image shows table fully extended
The OCALA dining table extends from 2.2 metres to 3.2 metres
OCALA Dining table shown with OCALA dining chairs
*PLEASE NOTE - the dining chairs are no longer available.
The OCALA Dining table extends from 2.2m to 3.2m
The OCALA Outdoor Extending Dining Table is just 2.2m long when closed. yet it has 2 extension leaves, each of 50cm, increasing the table length to 2.7 and 3.2m when fully extended.
The premium Burmese teak slats have a bold appearance due to the side profile of the table. The slats run downward at the table edge to give a sense of solidity.
The table frame is powder-coated stainless steel. The 2 extension pieces are mounted on an under-frame. To extend the table, pull out the table frame and flip each extension piece over using the pivot mount. It is recommended 2 people do the extension.
Available with a white powder-coated frame.
Golden Burmese teak and textured white frame for a sharp, architectural look.
| Dimensions - max (cm) | H | W | D | Arm height | Seat height |
| height, width, depth, arm, seat | 77 | 220-320 | 100 |
Materials:
Teak - Tectona Grandis
High quality teak wood planks are used in the manufacture of this outdoor dining table. The premium grade teak is characterized by a natural, warm, golden hue - free from knots and uneven grain patterns. This is the most dimensionally stable wood, with a long life characteristic.
Being a high quality hardwood, it will ensure long term use in our extreme NZ seasons.
Stainless steel frame
Powder-coated for weather protection and durability.
Product Care:
Teak: no particular care is required, unless if you want to keep the golden hue of the teak slats. In this case, regularly oil the table with a suitable high quality teak wood stain/preserver.
If dark, black patches develop on the teak surface, this is due to the growth of mold on the table. This can happen if the table is in an area where there is a lot of tree growth and mold spores are present in the air. If the table stays wet for a period of time, the mold spores can grow in these damp conditions. It is not a sign that the wood is rotting. Treatment can be effective by cleaning with a mild bleach solution. Alternatively, it can be sanded off.
Stainless steel frame: no particular care is required. From time to time, clean with a soft brush and soapy water and rinse clean. Avoid scratching the powder-coated surface.
In case of manufacturing or material faults, Poynters will repair or replace this furniture free of charge within a period of 2 years from the date of purchase, for domestic use. Note that all damage caused by normal wear and tear, improper or unreasonable use or improper maintenance are not covered by this warranty. Unless otherwise stated, cushions are excluded from this warranty.
No one has reviewed this product!
Write a Review
